Tienes la carpeta de Voice mail prompts?
Dentro de ella vienen los prompts en varios lenguajes, incluyendo el español.
Ahi mismo viene el archivo Readme.txt con el procedimiento
de como cargarle el lenguaje.
Si no lo tienes, dimelo para hecertelo llegar via doktor
Just translated this to English - for me better to understand:
Do you have prompts in the Voice mail folder?
Among them are the prompts in several languages, including Spanish.
Here comes the same procedure with Readme.txt
as the language of charge.
If you do not have these, let me know and I will send them through doktor's email exchange.
Hay un truco que tienes que hacer:
copia el archivo spanish.bin a tu PC y luego lo renombras como spain.bin
Cuando hagas el procedimiento :
There is a Trick what you must to do:
Copy spanish.bin file to your PC and rename it to spain.bin
<<<ipLDK-60 VMIU PROMPT PROGRAMMING>>>
***PREREQUISITES***
1. ipLDK-60 system should have an IP address(PGM 108) and be connected in the Network.
2. VMIU or AAFU should be installed in the system.
3. You have the Prompt file(*.bin) which you want to program.
***PROCEDURE***
0. Copy the Prompt file(*.bin) to a directory in your computer(ex. D:\ drive).
1. Run a FTP Client application. (or you can do this in the MS-DOS window)
2. Log on to the ipLDK-60 system
<EXAMPLE>
D:\>ftp 150.150.54.26
Connected to 150.150.54.26.
220 FTP Server ready.
User (150.150.54.26none)): admin
331 Password required for admin.
Password: admin(hidden)
230 User logged in.
ftp>
3. In ftp command mode
ftp> bin
200 Type set to I
ftp> hash
Hash mark printing On ftp: (2048 bytes/hash mark) .
ftp> put <file_name>
file_name : Prompt file name (ex. english.bin)
<EXAMPLE>
ftp> put english.bin
200 Port command successful.
150 Opening Binary mode data connection for english.bin.
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################################################################
226 Transfer complete. Trace 3
ftp: 1454080 bytes sent in 29.91Seconds 48.62Kbytes/sec.
ftp>
4. After completing of file transfer
5. Connect to the ipLDK-60 system via TELNET or SERIAL Comm.(RS-232 PORT)
6. go to the 'maint' mode(password : brandy)
7. Check Prompt file exists
ipLDK-60 System
Version GS88P-C.7Ao NOV/06
Dsp Version: 3.0(06/06/29)
DATE: 12/13/06
TIME: 13:35:35
SITE NAME :
ENTER PASSWORD: ******
maint> file
maint>file> dir c
file name size(bytes) LSADlshr(attr)
===============================================================================
english.bin 1454080 --------
>>> Total 1 file(s) exist on disk!
>>> Total 625920 bytes are available on C drive!
maint>file> x
maint>
8. go back to the 'maint' mode and burn prompt file to VMIU/AAFU
maint>file>x <enter>
maint>
maint>fp i <nation_code><<<AQUI PONES spain.bin>>>>>>>>>>
nation_code : english/turkey/brazil/korea
english : English prompt
turkey : Turkish prompt
brazil : Portuguese prompt
korea : Korean prompt
Already loaded and after that I get up but when I do the spain.bin PGM / TRANS then the digit "0" and then "6" will not let me create the message and not hear promts and Spanish when I do the # will not let me create the voice, apparently the card is blocked after the burden of language, and satisfied that I've done a reset to the IPLDK-60 and continuing with that same problem!
Greetings!
Ya lo cargue y despues de eso me levanto el spain.bin pero cuando hago PGM/TRANS luego digito el "0" y luego "6" no me deja crear el mensaje de bienvenida y tampoco escuchar los promts en español y cuando le hago el # no me deja crear la voz, aparentemente la tarjeta quedo bloqueada luego de esa carga de idioma, y conste que le he hecho un reseteo a la central e igual sigue con ese problema!!!
si lo estoy usando pero eso cuando le hago PGM 0 6 y luego queda estatico o sea ya no me da la voz para grabar y si le trato de grabar un mensaje no pasa nada queda ahi en la pantalla
but if I am using this when I was PGM 0 6 is static or is no longer gives me the voice recording and if you try to record a message there is nothing on the screen
The language files are different for the VMIBE/AAFUE boards you install to the different ipLDK systems.
Please state what ipLDK-systems (20/24/50/60/100/300/600)you need the language files for.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.