Is it possible to create a batch to search...then once it finds the object/file...then moves it to a directory of my choice? Is this possible?
dj beenie
dj beenie
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
A way to SEARCH then when object is found > MOVE to directory?
- Thread starter djbeenie
- Start date
trollacious
Programmer
It'd be a lot easier using a scripting language like VBScript because you could use a recursive search that wouldn't be possible with batch commands.
Lee
Lee
Actually Batch would not be terrible for this since the Dir command will already search recursively if you give it the right switch (/s). So you could potentially do this with one line in a batch or considerably more lines in VBScript.
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
trollacious
Programmer
I thought of that, but couldn't think of a way to redirect the output into the move command then.
Lee
Lee
- Thread starter
- #5
I have no programing skills with VB. Anyone know of a good site with a tutorial? I can probably pick it up fast. 
dj beenie
dj beenie
trollacious
Programmer
Try a google search for VBScript tutorial.
Lee
Lee
Let's say that you have a file on your computer named foo.txt but you don't know where it is. This command would find that file and move it to a directory name C:\Bar:
FOR /R %i IN (foo.txt) DO move %i C:\Bar
Be aware that if you have foo.txt in more than one place, you will be prompted to overwrite for every file that you find after the first one.
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
FOR /R %i IN (foo.txt) DO move %i C:\Bar
Be aware that if you have foo.txt in more than one place, you will be prompted to overwrite for every file that you find after the first one.
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
- Thread starter
- #8
trollacious
Programmer
No, he's using batch file commands. I hadn't worked with batch files much since Windows 98, and don't recall having seen the /R switch for a recursive search.
Lee
Lee
Yes it is batch. From the help for FOR:
C:\data\Active\Scripts\C#\AllAboutClass\bin\Debug>help for
Runs a specified command for each file in a set of files.
FOR %variable IN (set) DO command [command-parameters]
%variable Specifies a single letter replaceable parameter.
(set) Specifies a set of one or more files. Wildcards may be used.
command Specifies the command to carry out for each file.
command-parameters
Specifies parameters or switches for the specified command.
To use the FOR command in a batch program, specify %%variable instead
of %variable. Variable names are case sensitive, so %i is different
from %I.
If Command Extensions are enabled, the following additional
forms of the FOR command are supported:
FOR /D %variable IN (set) DO command [command-parameters]
If set contains wildcards, then specifies to match against directory
names instead of file names.
FOR /R [[drive:]path] %variable IN (set) DO command [command-parameters]
Walks the directory tree rooted at [drive:]path, executing the FOR
statement in each directory of the tree. If no directory
specification is specified after /R then the current directory is
assumed. If set is just a single period (.) character then it
will just enumerate the directory tree.
FOR /L %variable IN (start,step,end) DO command [command-parameters]
The set is a sequence of numbers from start to end, by step amount.
So (1,1,5) would generate the sequence 1 2 3 4 5 and (5,-1,1) would
generate the sequence (5 4 3 2 1)
FOR /F ["options"] %variable IN (file-set) DO command [command-parameters]
FOR /F ["options"] %variable IN ("string") DO command [command-parameters]
FOR /F ["options"] %variable IN ('command') DO command [command-parameters]
or, if usebackq option present:
FOR /F ["options"] %variable IN (file-set) DO command [command-parameters]
FOR /F ["options"] %variable IN ('string') DO command [command-parameters]
FOR /F ["options"] %variable IN (`command`) DO command [command-parameters]
filenameset is one or more file names. Each file is opened, read
and processed before going on to the next file in filenameset.
and processed before going on to the next file in filenameset.
Processing consists of reading in the file, breaking it up into
individual lines of text and then parsing each line into zero or
more tokens. The body of the for loop is then called with the
variable value(s) set to the found token string(s). By default, /F
passes the first blank separated token from each line of each file.
Blank lines are skipped. You can override the default parsing
behavior by specifying the optional "options" parameter. This
is a quoted string which contains one or more keywords to specify
different parsing options. The keywords are:
eol=c - specifies an end of line comment character
(just one)
skip=n - specifies the number of lines to skip at the
beginning of the file.
delims=xxx - specifies a delimiter set. This replaces the
default delimiter set of space and tab.
tokens=x,y,m-n - specifies which tokens from each line are to
be passed to the for body for each iteration.
This will cause additional variable names to
be allocated. The m-n form is a range,
specifying the mth through the nth tokens. If
the last character in the tokens= string is an
asterisk, then an additional variable is
allocated and receives the remaining text on
the line after the last token parsed.
usebackq - specifies that the new semantics are in force,
where a back quoted string is executed as a
command and a single quoted string is a
literal string command and allows the use of
double quotes to quote file names in
filenameset.
Some examples might help:
FOR /F "eol=; tokens=2,3* delims=, " %i in (myfile.txt) do @echo %i %j %k
would parse each line in myfile.txt, ignoring lines that begin with
a semicolon, passing the 2nd and 3rd token from each line to the for
body, with tokens delimited by commas and/or spaces. Notice the for
body statements reference %i to get the 2nd token, %j to get the
3rd token, and %k to get all remaining tokens after the 3rd. For
file names that contain spaces, you need to quote the filenames with
double quotes. In order to use double quotes in this manner, you also
need to use the usebackq option, otherwise the double quotes will be
interpreted as defining a literal string to parse.
%i is explicitly declared in the for statement and the %j and %k
are implicitly declared via the tokens= option. You can specify up
are implicitly declared via the tokens= option. You can specify up
to 26 tokens via the tokens= line, provided it does not cause an
attempt to declare a variable higher than the letter 'z' or 'Z'.
Remember, FOR variables are single-letter, case sensitive, global,
and you can't have more than 52 total active at any one time.
You can also use the FOR /F parsing logic on an immediate string, by
making the filenameset between the parenthesis a quoted string,
using single quote characters. It will be treated as a single line
of input from a file and parsed.
Finally, you can use the FOR /F command to parse the output of a
command. You do this by making the filenameset between the
parenthesis a back quoted string. It will be treated as a command
line, which is passed to a child CMD.EXE and the output is captured
into memory and parsed as if it was a file. So the following
example:
FOR /F "usebackq delims==" %i IN (`set`) DO @echo %i
would enumerate the environment variable names in the current
environment.
In addition, substitution of FOR variable references has been enhanced.
You can now use the following optional syntax:
%~I - expands %I removing any surrounding quotes (")
%~fI - expands %I to a fully qualified path name
%~dI - expands %I to a drive letter only
%~pI - expands %I to a path only
%~nI - expands %I to a file name only
%~xI - expands %I to a file extension only
%~sI - expanded path contains short names only
%~aI - expands %I to file attributes of file
%~tI - expands %I to date/time of file
%~zI - expands %I to size of file
%~$PATH:I - searches the directories listed in the PATH
environment variable and expands %I to the
fully qualified name of the first one found.
If the environment variable name is not
defined or the file is not found by the
search, then this modifier expands to the
empty string
The modifiers can be combined to get compound results:
%~dpI - expands %I to a drive letter and path only
%~nxI - expands %I to a file name and extension only
%~fsI - expands %I to a full path name with short names only
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
C:\data\Active\Scripts\C#\AllAboutClass\bin\Debug>help for
Runs a specified command for each file in a set of files.
FOR %variable IN (set) DO command [command-parameters]
%variable Specifies a single letter replaceable parameter.
(set) Specifies a set of one or more files. Wildcards may be used.
command Specifies the command to carry out for each file.
command-parameters
Specifies parameters or switches for the specified command.
To use the FOR command in a batch program, specify %%variable instead
of %variable. Variable names are case sensitive, so %i is different
from %I.
If Command Extensions are enabled, the following additional
forms of the FOR command are supported:
FOR /D %variable IN (set) DO command [command-parameters]
If set contains wildcards, then specifies to match against directory
names instead of file names.
FOR /R [[drive:]path] %variable IN (set) DO command [command-parameters]
Walks the directory tree rooted at [drive:]path, executing the FOR
statement in each directory of the tree. If no directory
specification is specified after /R then the current directory is
assumed. If set is just a single period (.) character then it
will just enumerate the directory tree.
FOR /L %variable IN (start,step,end) DO command [command-parameters]
The set is a sequence of numbers from start to end, by step amount.
So (1,1,5) would generate the sequence 1 2 3 4 5 and (5,-1,1) would
generate the sequence (5 4 3 2 1)
FOR /F ["options"] %variable IN (file-set) DO command [command-parameters]
FOR /F ["options"] %variable IN ("string") DO command [command-parameters]
FOR /F ["options"] %variable IN ('command') DO command [command-parameters]
or, if usebackq option present:
FOR /F ["options"] %variable IN (file-set) DO command [command-parameters]
FOR /F ["options"] %variable IN ('string') DO command [command-parameters]
FOR /F ["options"] %variable IN (`command`) DO command [command-parameters]
filenameset is one or more file names. Each file is opened, read
and processed before going on to the next file in filenameset.
and processed before going on to the next file in filenameset.
Processing consists of reading in the file, breaking it up into
individual lines of text and then parsing each line into zero or
more tokens. The body of the for loop is then called with the
variable value(s) set to the found token string(s). By default, /F
passes the first blank separated token from each line of each file.
Blank lines are skipped. You can override the default parsing
behavior by specifying the optional "options" parameter. This
is a quoted string which contains one or more keywords to specify
different parsing options. The keywords are:
eol=c - specifies an end of line comment character
(just one)
skip=n - specifies the number of lines to skip at the
beginning of the file.
delims=xxx - specifies a delimiter set. This replaces the
default delimiter set of space and tab.
tokens=x,y,m-n - specifies which tokens from each line are to
be passed to the for body for each iteration.
This will cause additional variable names to
be allocated. The m-n form is a range,
specifying the mth through the nth tokens. If
the last character in the tokens= string is an
asterisk, then an additional variable is
allocated and receives the remaining text on
the line after the last token parsed.
usebackq - specifies that the new semantics are in force,
where a back quoted string is executed as a
command and a single quoted string is a
literal string command and allows the use of
double quotes to quote file names in
filenameset.
Some examples might help:
FOR /F "eol=; tokens=2,3* delims=, " %i in (myfile.txt) do @echo %i %j %k
would parse each line in myfile.txt, ignoring lines that begin with
a semicolon, passing the 2nd and 3rd token from each line to the for
body, with tokens delimited by commas and/or spaces. Notice the for
body statements reference %i to get the 2nd token, %j to get the
3rd token, and %k to get all remaining tokens after the 3rd. For
file names that contain spaces, you need to quote the filenames with
double quotes. In order to use double quotes in this manner, you also
need to use the usebackq option, otherwise the double quotes will be
interpreted as defining a literal string to parse.
%i is explicitly declared in the for statement and the %j and %k
are implicitly declared via the tokens= option. You can specify up
are implicitly declared via the tokens= option. You can specify up
to 26 tokens via the tokens= line, provided it does not cause an
attempt to declare a variable higher than the letter 'z' or 'Z'.
Remember, FOR variables are single-letter, case sensitive, global,
and you can't have more than 52 total active at any one time.
You can also use the FOR /F parsing logic on an immediate string, by
making the filenameset between the parenthesis a quoted string,
using single quote characters. It will be treated as a single line
of input from a file and parsed.
Finally, you can use the FOR /F command to parse the output of a
command. You do this by making the filenameset between the
parenthesis a back quoted string. It will be treated as a command
line, which is passed to a child CMD.EXE and the output is captured
into memory and parsed as if it was a file. So the following
example:
FOR /F "usebackq delims==" %i IN (`set`) DO @echo %i
would enumerate the environment variable names in the current
environment.
In addition, substitution of FOR variable references has been enhanced.
You can now use the following optional syntax:
%~I - expands %I removing any surrounding quotes (")
%~fI - expands %I to a fully qualified path name
%~dI - expands %I to a drive letter only
%~pI - expands %I to a path only
%~nI - expands %I to a file name only
%~xI - expands %I to a file extension only
%~sI - expanded path contains short names only
%~aI - expands %I to file attributes of file
%~tI - expands %I to date/time of file
%~zI - expands %I to size of file
%~$PATH:I - searches the directories listed in the PATH
environment variable and expands %I to the
fully qualified name of the first one found.
If the environment variable name is not
defined or the file is not found by the
search, then this modifier expands to the
empty string
The modifiers can be combined to get compound results:
%~dpI - expands %I to a drive letter and path only
%~nxI - expands %I to a file name and extension only
%~fsI - expands %I to a full path name with short names only
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
- Thread starter
- #11
Oh so close, any suggestions? It found it and tried to move it.
FOR /R %i IN (foo.txt) DO move %i \\server\Temp\%username%
C:\>move C:\Documents and Settings\bbrooks\Local Settings\Application Data\Microsoft\Outlook\Outlook.pst \\server\Temp\myusername
The syntax of the command is incorrect.
dj beenie
FOR /R %i IN (foo.txt) DO move %i \\server\Temp\%username%
C:\>move C:\Documents and Settings\bbrooks\Local Settings\Application Data\Microsoft\Outlook\Outlook.pst \\server\Temp\myusername
The syntax of the command is incorrect.
dj beenie
trollacious
Programmer
Use a double percent sign inside batch files.
Lee
Lee
- Thread starter
- #13
He means that if you are using the command in a batch file anywhere that you have % you need to have %% instead.
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
- Thread starter
- #15
I have tried this:
FOR /R %%i IN (*.pst) DO move %%i \\server\Temp\%%username%%
%%i was unexpected at this time.
FOR /R %i IN (*.pst) DO move %i \\server\Temp\%%username%%
The syntax of the command is incorrect.
Both are not working. Am I missing something?
dj beenie
FOR /R %%i IN (*.pst) DO move %%i \\server\Temp\%%username%%
%%i was unexpected at this time.
FOR /R %i IN (*.pst) DO move %i \\server\Temp\%%username%%
The syntax of the command is incorrect.
Both are not working. Am I missing something?
dj beenie
Are you doing this within a bat or as a single command at the command line?
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
[red]"... isn't sanity really just a one trick pony anyway?! I mean, all you get is one trick, rational thinking, but when you are good and crazy, oooh, oooh, oooh, the sky is the limit!" - The Tick[/red]
- Thread starter
- #17
Sigle right now, just for testing. It will eventualy go to batch. Should I just go ahead and create a batch?
dj beenie
dj beenie
trollacious
Programmer
The command line uses single percent signs, but you need double ones inside the batch file because the percent sign means the next character is to be taken literally (like an escape character), and is stripped off. You need to use a double percent sign to indicate the batch processor should read a single percent sign.
I'd create a batch file so you can test what you'll actually be using in real life.
Lee
I'd create a batch file so you can test what you'll actually be using in real life.
Lee
- Status
Similar threads
- Locked
- Question