a-number transit

[mdbr]

Hi all,

I have MD110, bc7.2 version. I have this case:

--CAS TRUNK E1 PUBLIC--->MD110----ISDN TRUNK E1 PRIVATE-->CISCO

When the extension in CISCO received incoming call public, don´t received a-number.

i´m sorry for my bad english.

Thanks for all,

 

[patcher]

Are you sure you have CLI from CAS to MD110? CAS never have a feature of A-number presentation unless you use MFC signalling.

 

[mdbr]

Hi patcher

I have a-number from PSTN (cas trunk). Digital Extension in MD110 receive a-number in display. Cisco extension dont receive a-number, but receive MD110 Extension number.

PSTN PARAMETERS:

RODAP:ROU=1;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 TL30 H'00000000 H'00000122 H'00000772 NO

ROCAP:ROU=1;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 112000010000 5 2100000010 0 30 128 00151515 311100010050 0011



ISDN PARAMETERS:

RODAP:ROU=60;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
60 SL60 H'00000310 H'15400000 H'16300000 NO

ROCAP:ROU=60;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
60 712000000000 5 2110000011 0 30 128 00151515 111100000031 0011

RODDPEST=5222;
EXTERNAL DESTINATION DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
5222 60 00000000000250 0 1 0

The number "5222" is extension cisco.

MDBR

 

[patcher]

Hello MDBR, I think BC7 is not capable of doing this. Original A-Number is implemented from BC10. You can configure this on destination's ADC. I checked BC7 and there is no settings like this. If your customer is willing to upgrade, why not. Upgrade your site to BC12 and you will enjoy many features.