A-Number on DPNSS-PRI connection

[cpux10]

Hi,

We have a DPNSS connection between a foreign PBX and MD110 (BC11). A-Number is received on calls from the PBX to MD110.

We also have a PRI connection from our MD110 to the PSTN. A-Number is sent on this link also to the PSTN.

Now the case we have is that a caller calls from the foreign PBX through the MD110 to the PSTN (first DPNSS to MD110, next PRI from MD110 to PSTN), in this case the A-Number is not sent to the PSTN.

Any ideas where the problem is?

The DPNSS link parameters:

<ROCAP:ROU=18;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
18 713000000000001 5 2110130000 0 30 128 00151515 311101000011 001100

END

<RODAP:ROU=18;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
18 TL50 H'00000002 H'00000000 H'00000000 NO

END

The PRI link parameters:

<RODAP:ROU=41;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
41 SL60 H'00000200 H'00000000 H'04010020 NO

END

<ROCAP:ROU=41;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
41 011000000000001 5 3100000000 0 30 128 00151515 311100000030 111111

END

 

[ceejay55]

Does you carrier allow another number ( i.e not part of that sites ISDN number range) to be sent out ?.Here we can't and you just get default (main)ISDN number sent out

 

[cpux10]

Yes, its allowed. We have a QSIG connection to another location, and calls from that site send out their number to the PSTN correctly.