-
4
- #1
If you have any custom modules setting Voicemail on/off, this feature is partially broken in R9.1.
You can set Voicemail On, no issues.
But if you try to set Voicemail Off, you will actually disable the entire account in VMPro.
If you run the feature, you would have to use the VMPro Client> Users> right click> Activate to get it going again.
Any alterations to the users VM settings in Manager will not take any more, until you've done the above.
The feature to avoid:
or as free format command: CFG:SET "$NAM" voicemail_on 0
The fault shows up like this after running the voicemail off-command:
NB: This does not affect using Visual Voice or other built-in end user VM access to set the Voicemail mode on or off.
Kind regards
Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam
You can set Voicemail On, no issues.
But if you try to set Voicemail Off, you will actually disable the entire account in VMPro.
If you run the feature, you would have to use the VMPro Client> Users> right click> Activate to get it going again.
Any alterations to the users VM settings in Manager will not take any more, until you've done the above.
The feature to avoid:

or as free format command: CFG:SET "$NAM" voicemail_on 0
The fault shows up like this after running the voicemail off-command:

NB: This does not affect using Visual Voice or other built-in end user VM access to set the Voicemail mode on or off.
Kind regards
Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam
