Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9840 Fibre in a mixed L700

Status
Not open for further replies.

TekAndy

Technical User
Mar 6, 2007
185
US
We recently replaced a couple of 9840A fibre drives in an L700 and we are getting loop ID errors on the server. We configured them the same as the ones that came out, but still have a problem with one of the "other" drives having a conflict. Any suggestions?

Andy
 
Hey Chris, I'm not sure of the cofig for Hard PA. is this "hard Physical Address"? Thanks for the help Chris!!
How are things out your way? I was just involved in a silo de-install yesterday....boy am I beat!!!

Andy
 
You need to go into the Drive config menu and set HARD Physical Address to NO
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top