Hey everyone. I've had the 2.0 firmware since it came out. The first problem I ran in to is when on a call and a second call comes in the softkeys change from hold, conf, transfer, drop to answer, blank, ignore, back. I was fine with just backing the phones that requested back to 1.550. Now a friend of mine in the same field is having the same problem and I'd like to help. Does anyone know if it's possible to stop the phone from changing these softkeys? I know 2.0 added the ability to change softkeys at idle, not sure about anything else. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
96XX Version 2.00 firmware
- Thread starter thejkro
- Start date
alienpotato
MIS
Take at look at p108 of this document:
I would try making changes to TALKFEATURES which controls which controls what softkeys show up during a call.
There is no option for ringing line while active but try adding the buttons you want in TALKFEATURES and see if they show up.
I would try making changes to TALKFEATURES which controls which controls what softkeys show up during a call.
There is no option for ringing line while active but try adding the buttons you want in TALKFEATURES and see if they show up.
phoneguy55
Programmer
2.0 is full of bugs. I'm waiting for the next release to be GA. If you make a stink with Avaya they will give you 2.04. Until then its 1.55 for me...
- Thread starter
- #4
phoneguy55
Programmer
No clue on GA. Hopefully soon.
what dont you like about 1.55?
what dont you like about 1.55?
- Status