9611G & VPN & IKE error

[m1kep]

Hello

I am trying to get a 9611G to be a VPN handset. The phone is enabled for VPN and it accepts the VPN settings, but when the phone boots up it comes up with IKE phase 1 error.

Any ideas how to resolve this?

M1kep

 

[JayNEC]

You really need to look at the logs on the firewall side. It's probably a mismatch in the phase 1 proposals though.

After you get phase 1 working then you have the joy of getting phase 2 negotiated!

New England Communications

http://www.necomm.com

 

[m1kep]

Thank you JayNEC

The funny thing is the 4610's work fine on CM but the 9611G's dont want to play ball.

 

[JayNEC]

Should be the exact same settings between the two. Your PSK might be wrong if you're doing it via the handset, it's a real pain there. You can set it via the 46xxsettings.txt file too, and you know it will be correct there.

New England Communications

http://www.necomm.com

 

[m1kep]

Ive noticed though at no time have I been asked for Callserver settings nor fileserver settings. Is that right?

 

[JayNEC]

Those aren't part of the VPN stuff anyway therefore won't cause it to fail. But yeah you need to manually input callserver and fileserver.

New England Communications

http://www.necomm.com