Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9608 Remote Phone 8.0.56 IPOV2

Status
Not open for further replies.

Bradley71

Technical User
Sep 23, 2013
15
US
I am trying to get a remote phone up. The remote site has Comcast for their ISP and a Technicolor TC8305C modem/router.

I did have success with it at our office and two other locations. (All three were with Time Warner ISP)

The phone will register...sorta. But it will just say "phone" and have access to the features only. In the monitor the phone does show as being registered, but the phone type says its a 4624? Maybe a glitch with the SW version? Its a 9608.

Any help would be appreciated.

 
When I last had this issue it was the phone not upgraded properly.
I had to get the remote phone put back in to the main office (as something was going squiffy pulling updates over the net) and configured for local use on the system; it upgraded and we could log it in/use it fine, continued to work when it was used back at the remote site.

Might help, might not.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top