Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9608 remote extn. stuck in discovery 1

Status
Not open for further replies.

G0G3tt3r

Programmer
Nov 11, 2009
141
US
I have every port unblocked to the IP OFFICE.
i am using DHCP at remote location on 9608 phone.
phone shows even after a factory default, ext.233 on 3 buttons on the right. just for a few seconds then goes to registering, discovering, then repeat. the extn i am registering is 220. am I going crazy?



mS PRN: TLS:Alert Src=192.168.1.200:411 Dst=173.162.24.225:36847 Code=0 Level=Warn
12:04:31 2132594mS H323Evt: Recv GRQ from ada218e1
12:04:31 2132594mS H323Evt: e_H225_AliasAddress_dialedDigits alias
12:04:31 2132594mS H323Evt: found number <220>
12:04:31 2132623mS RES: Tue 19/4/2016 12:04:30 FreeMem=57096476 (Heap=56739756(0) + Cache=356720) MemObjs=7098(Max 7277) CMMsg=5(6) Buff=5200 1353 1000 7444 5 Links=50966(58000) BTree=14742 CPU=08.43% CPUStats=04.38%/1/3/4887/23981/24788/00.05%/0/02.3
3% MCR=0 MCW=0
12:04:31 2132623mS RES2: IP 500 V2 9.1.0.0 build 437 Tasks=49 RTEngine=0 CMRTEngine=0 ExRTEngine=0 Timer=50 Poll=0 Ready=0 CMReady=0 CMQueue=0 VPNNQueue=0 Monitor=1 SSA=0 TCP=17(TLS=5) TAPI=0 ASC=1 SYS=MNTD OPT=UMNT SDSPD=2034
12:04:31 2132623mS RES4: XML MemObjs=63 PoolMem=4876404(2) FreeMem=4861100(0)
12:04:31 2132623mS RES5: CLog MemObjs=81 FreePoolMem(Objs)=6188(119) TotalMem=114000
12:04:33 2134894mS H323Evt: IRCheckTimer: GRQ record deleted (user name=; extn-num=220)
12:04:33 2134894mS H323Evt: IRCheckTimer: GRQ record deleted (user name=; extn-num=220)
12:04:42 2143159mS H323Evt: Recv GRQ from ada218e1
12:04:42 2143159mS H323Evt: e_H225_AliasAddress_dialedDigits alias
12:04:42 2143160mS H323Evt: found number <220>
12:04:42 2143623mS RES: Tue 19/4/2016 12:04:42 FreeMem=57
 
Can you ping the public IP from a pc and get a response, if not, that's why. A few other things to double check. Also, when you defaulted it, you did a CRAFT Reset?

System>Lan1>VoIP
H323 Remote Extn Enable should be checked

System>Lan1>Network Topology
Is this information filled out correctly

User>Ext220
Enable Remote Worker should be checked
 
yes to everything except:

when you say craft reset, i went in craft and did CLEAR.

in topology i left everything blank or default except public ip which i populated myself with the host system public ip.( tried to do STUN but no stun servers i found would allow me to click the RUN STUN Button. it stayed grayed out.

firewall type is set to open internet

ip route for now is 0.0.0.0 plus my sub and gateway on site.
 
try changing the Firewall Type to Static Port Block

also, on the craft menu do a Reset. this will erase everything so you can put it in from scratch, clear doesnt do that
 
OMG you da man!!! all is well!!
heres a star
 
FYI....when you CLEAR it will erase everything, when you RESET, some settings will still be there like contacts and other user information.
 
I have every port unblocked to the IP OFFICE.

expect o get Hacked in short order.
if you do not know how to correctly configure & secure these features please call a professional who does or you are likely to get a nasty surprise.



Do things on the cheap & it will cost you dear
 
If you want a cool surprise, pull the chain before you rise.

Here's a witty rejoinder for you.
 
Glad your are fixed, I've had this issue where a reset/clear didn't fix it and I had to swap the phone, for some reason the 9608 wouldn't pull an IP from the correct VLAN.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top