Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9608 Phone, Set to Half Screen, Right Column of buttons blank

Status
Not open for further replies.

mhshane

MIS
Dec 12, 2005
130
US
CM 6.0
S8800

9608 Desk phones aliased as 9630 as recommended by Avaya

I have the following buttons set up:
Call-appr
Call-appr
Call-appr
Directory
Next
Call-display
5 Busy indicators

For some reason when I set the screen display to Half Screen the right column of buttons are blank.
I have to scroll to the next page to see Directory, Next, and Call-display

So it looks like this (x is the physical button):
x 3942 \ <blank> x
x 3942 \ <blank> x
x 3942 \ <blank> x
x <Blank> \ <blank> x

Page 2
x Directory \ Busy 4098 x
x Next \ Busy 4091 x
x Call-Display \ Busy 4092 x
x Busy 2316 \ Busy 4093 x

Any idea how to get them on Page 1?

Thanks
 
9608 Desk phones aliased as 9630 as recommended by Avaya"

I think this has changed, the admin manual dated Aug 2010 says 9630, but a newer one (Feb 2012) says to alias as 9650. Does changing that make a difference?
 
Thank you latitude12 for the suggestion however it didn't change the screen.
 
I remember having to make a change in the setting file for this to work, just don remember what.

dp
 
I believe that I set PHNSCRALL 1. Try it and then set the screen to half, and I think that should fix it.

dp
 
By default the 1st page only has call-appr buttons. To change this you need the 46xxsettings file.


Enable/disable Feature Button on Phone
## When FBONCASCREEN is set to 1 Feature Button are also
## displayed on Call Appearance filtered screen.
## Default = 0.
## Note: This feature is available on H.323 release 3.0 only for 9630 or 9640 phones & release 6.0 for 96x1 phones..
## SET FBONCASCREEN 0


-CL
 
lopes1211 is correct, you want "SET FBONCASCREEN 1" somewhere (anywhere) in your 46xxsettings.txt file.


i prefer clarity to agreement - dennis prager
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top