9115 problem

[hwngambler]

Hey guys I installed a 9115 everthing is programmed. The only thing I get on the phone is time and date from the 81c.
I check the display log and I find a log 79 has anybody seen this if so could you help. Also I can ping the 9115 gateway and the IP it's self.

J Cadina IV
AKA (HWNGAMBER)

 

[lgarza1]

Here is the help text for Log 79:

LOG NUMBER 79
DESCRIPTION This log indicates an error in reading key map flash.
SEVERITY MAJOR
TASK Device Control
PRODUCT 9150, 911x
CANCELLATION None
ACTION TO BE TAKEN: 1) Reset remote unit. If the problem persists, try action #2.2) Disable and re-enable the RLC. If the problem persists, try action #3.3) Re-set the RLC and the remote unit. If the problem persists, contact your TelStrat vendor.
PARAMETERS P1: SUCCESS or reason for failure.
DISPLAYED TEXT PBX Model database read - P1

 

[hwngambler]

I done all these procedures do have any ideas

J Cadina IV
AKA (HWNGAMBER)

 

[lgarza1]

What other messages are in the log?

 

[hwngambler]

that was the only log number. The problem was that in unit 1 it had to be local thats why it had a conflict. Thanks for the help any way guys.

J Cadina IV
AKA (HWNGAMBER)