911

[tiaka]

Ok So ive got 2 cabinets coming off the main cab Ive just installed some CO lines and trunk on Cab 02.

Cab 01. [Processor] G3SI v8
Cab 02. Port Network Im working on now for 911
Cab 03. OK for 911

Im trying to find out how to route 911 out my Trk Grp 3? on CAB 02? so the address synchs with the 911 Operator.

Can someone give me a specifics on how to set this up? I do not have tenants setup? and when I do list ars route chosen 9911 here's what I get

ARS ROUTE CHOSEN REPORT

Location: 1 Partitioned Group Number: 1

Dialed Total Route Call Node
String Min Max Pattern Type Number Location

99 7 7 p17 hnpa all

I just want to make sure if I change route 17 it doesnt affect all users on Cab 01. [Processor] G3SI v8

 

[tiaka]

Heres my PARTITION ROUTE TABLE
In not surre how to read it I only know

Trk 6 routes out Cab 01
Trk 1 routes out CAB 02 and is discoed
Trk 3 routes out CAB 02 and is the one I want to use
Not sure what PG 1 PGN 2 PGN 3 is also

PARTITION ROUTING TABLE

Routing Patterns
Route
Index PGN 1 PGN 2 PGN 3 PGN 4 PGN 5 PGN 6 PGN 7 PGN 8
----- ----- ----- ----- ----- ----- ----- ----- -----
2 6 6 106
3 1 1 101
4 deny deny deny
5 9 16 109
6 3 3 103
7 deny 3 deny
8 10 deny 110
9 10 deny 110
10 3 3 103
11 13 13 113
12 10 3 110
13 3 deny 103
14 8 8 108
15 13 deny 113
16 33 33 33

 

[TwystedPair]

Did you ever find an answer to this?

 

[tiaka]

No

Your the first to respond I saw another thread that had something to do with Partition groups and Route Patterns I tried using my cell phone as a test number but it still dials out the main Cab01...I was going to add a 911 to the ARS ana table but was afraid if someone was to use it it would route out the wrong location anyways if you have a step by step method I would appreciate it

I also checked the following manual from AVAYA
Avaya Communication™ Manager Application Notes:
Emergency Calling
It does not go into detail about setting up in my scenario
Thanks

 

[tiaka]

heres the thread
thread690-1168085: Multiple ARS routing