I have a PBX CS1000E Rls 5.0 with GEO in Memphis,TN.
I have 4 IPMG installed in Building A and 1 IPMG in building B, I have a T1 card for outbound calls. Ihave 2 CO lines per building and a 1 analog trunk card per building too (NT8D14BB). I have 2 CLID table programmed, when a user dials 911 sevice the PSAP sees the ANI numbee as follow
901 214 XXXX
ENTRY 4
HNTN 901
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 214
DIDN YES
HLOC 104
LSC
CLASS_FMT DN
What do I need to configure to send the correct ANI number of the Analog CO line depends of the building?
I have 4 IPMG installed in Building A and 1 IPMG in building B, I have a T1 card for outbound calls. Ihave 2 CO lines per building and a 1 analog trunk card per building too (NT8D14BB). I have 2 CLID table programmed, when a user dials 911 sevice the PSAP sees the ANI numbee as follow
901 214 XXXX
ENTRY 4
HNTN 901
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 214
DIDN YES
HLOC 104
LSC
CLASS_FMT DN
What do I need to configure to send the correct ANI number of the Analog CO line depends of the building?