911 broken in LCR

[chipig]

I have a IPS with 911 not working anymore. It all happens since we removed route 14 which was connected to a PRI from our system or maybe something I Did in LCR.
I only modified LCR group 3 for internal calls and 911 is in LCR group 0.

Here's what I got from MOC:

8A4005>911:WRONG-
855>911:03-

Even if I try to assign a new route pattern,it gives me an error:

8A4005>911:WRONG-002
DIGIT ERROR

Do I have deleted something by mistake in 8A4007 or it has something to do with the old missing route.All other calls are going to our new route 12 fine.

 

[belevedere]

If you are happy with it then leave it. I would shorten the 12-17 and 18xx 19xx digits to 11 so it will dial out faster. At 24 digits it will wait to see if they are all dialed unless you dial # as the end digit.

 

[chipig]

Yes I missed that, I have changed it and it is faster!