Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

*9000* Maintenance mode

Status
Not open for further replies.

RotoOrb

IS-IT--Management
Jul 29, 2005
54
NZ
any one help, trying to use *9000* maintence mode, we have set a 5420 to be system phone under telephony tab, type in short code, then ask for security code? where do we set that, or de-set it?, any one have any walkthru's or doc's available?
 
I have no idea where or what the code could be but does your code look like this

*9000*
Relay On
"MAINTENANCE"
Line 0

Kevin Wing
ACA- Implement IP Office
Carousel Industries
 
yep. looks like that, you need to set a system phone under telephony, for a user, lets them change stuff like time, etc to save logging in via isdn or local pc thru the manager program
 
This code is used to activate dial in on the first analog trunk for remote management and this code can be used for changing the date and time on 4.0 & 4.1 systems.
In 4.1 systems a key programmed as "self administer" with telehonenumber 2 can be used for changing the system time.
 
The securitycode is the user pincode
After that you are able to set the time and date


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
If a user does not have a code set then you get the options to set Time and Date straight away.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top