RHauk
IS-IT--Management
- Jul 18, 2013
- 1
Hello I cannot find how to turn on 900# access on our Mitel 3300. I need to do this for gaming regulations and faxes to specific 900#s
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
900# access
- Thread starter RHauk
- Start date
- Status
I assume you are referring to calling 1-900 numbers. Most likely this has been restricted in ARS.
To fix it go under your Call Routing, Automatic Route Selection, and ARS digits dialed.
First find out what termination type and number an 800 number is using (assuming you are using 9 as a leading digit it would look like 91800).
Click on ADD and now put in the full number in the digits dialed, eg: 919005551234, number of digits to follow will be 0, the termination type and number will be the values you found for the 800 number.
This now should allow you to dial that 900 number but not others, the ones you don't want people calling
.
Repeat for any other 900 numbers you need to dial.
To fix it go under your Call Routing, Automatic Route Selection, and ARS digits dialed.
First find out what termination type and number an 800 number is using (assuming you are using 9 as a leading digit it would look like 91800).
Click on ADD and now put in the full number in the digits dialed, eg: 919005551234, number of digits to follow will be 0, the termination type and number will be the values you found for the 800 number.
This now should allow you to dial that 900 number but not others, the ones you don't want people calling
.Repeat for any other 900 numbers you need to dial.
- Status
Similar threads
- Question