9 hrs calls

[punh]

In bill system ringmaster i find lot of calls for 9 hrs or above.

The trunks are analog

please give your suggestion on this
The following are the route parameters

TL11 H'00000022 H'00000708 H'00008815 NO

 

[TheCurious]

If your trunks are blocked (speech path is not disconnected)every 9 hours 55 minutes MD110 generates one call record in your billing system.

Is this your case?


The Curious

 

[punh]

i didn't find any blocking on the trunks, if i refresh the call logging program unit it will be o.k for 15 days and again it will generate the same problem.

The 9hrs calls in not one site problem we have lot of site installed with bc9 and bc12 but still the problem is the same in the ring master

 

[whosrdaddy]

you'll get this problem with trunk-to-trunk calls. apparently you are not getting a clearing signal. this means on the operator side the call is cleared but the MD110 still thinks that the call is going on. try to do LSCOP and see if you don't have 2 trunks in loop.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!