I have a Phone 8 Card in my IP Office 500 V2. When I go to change the extensions on my phone 8 card, brand new...it doesnt allow me to switch off of port 1of this card. I can change the extension of this port, but none of the others, it just snaps back to port one even if I click port 2, 3, etc. Anyone else having this issue? I even tried the extension renumber tool, and i selected the whole 8 ports for the range, just changed the first one, but none of the others. Thoughts???....so odd
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
9.1.5 Odd Issue 2
- Thread starter vobarex77
- Start date
-
1
- #2
intrigrant
Systems Engineer
Yes i have seen that.
Recreate the SD card, default the config and rebuild from scratch.
Recreate the SD card, default the config and rebuild from scratch.
- Thread starter
- #3
-
1
- #4
philhill74
Technical User
Try deleting the phone 8 and reboot , i have seen this error also and if i remember correctly the delete and reboot fixed it
intrigrant
Systems Engineer
There are other issues as well you have not noticed like changing line parameters which all will be changed in the first line only and while the setting is changed in another line... stuff like that
- Status