Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9.0 Call Control FNE 00 cant break dial tone

BernPed

Systems Engineer
May 12, 2022
7
US
Is there a hardware requirement for a PRI using Call Control FNE 00 which allows the user the ability to mask their caller ID number? I can dial into the DID that has the FNE 00 short code set up. I get a dial tone but then I can't break the dial tone for either internal or external. I just keep getting dial tone. I am using one of the PRI carrier cards with the legacy PRI card. I have all the correct items ticked on the users profile.
 
No. The feature needs a caller ID. It uses it to look for a matching user, by comparing to the user Twinned Mobile Number settings.
 
Without a matching DID as far as I know the call will declined. For me it sounds as if the IPO doesn't receive DTMF tones.
 
I changed the FNE to 31 and I get dial tone which means it is matching my caller ID number but I still can not break dial tone. Do I need a license of any kind?
 

Part and Inventory Search

Sponsor

Back
Top