BigSteve1968
Technical User
Hello all. I'm trying to install CM4.0 on an 8700MS. When i telnet into the system and start the install it asks for server type with several options (Dell / IBM / etc), which should I select?
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
8700MS - IBM Server?
- Thread starter BigSteve1968
- Start date
- Status
- Thread starter
- #2
BigSteve1968
Technical User
OK guys, i sussed it - it is because I had forgotten to put the DAj1 card back into the PCI slot. I took the cards out as it had a few problems - traced to a fault within the processor (swapped and is now OK).
It would occasionaly start boot (BIOS OK, showed RAM / HDD / etc info screen) and start to read hard drive but would fail after about 10 seconds.
hard drive OK - a bit of head scratching!!!
All is well now....
It would occasionaly start boot (BIOS OK, showed RAM / HDD / etc info screen) and start to read hard drive but would fail after about 10 seconds.
hard drive OK - a bit of head scratching!!!
All is well now....
- Status
Similar threads
- Locked
- News
- Locked
- Question
- Locked
- Question