Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

8600 4.1 &snmp community strings ?

Status
Not open for further replies.

mucca

MIS
Dec 21, 2006
70
GB
Hello guys , I have set the community strings on an 8600 , but they seem to have reset back to the old "public" & "private" defaults, is there a time limit for the community strings ??
It also will not let me telnet anymore or "device manage" as the gui is greyed out ??
It seems like a management issue as the performance is not affected.

the command I used when changing the strings was :

config snmp-v3 community-strings first xxxxxx
config snmp-v3 community-strings second xxxxxx


Any help much appreciated guys

Mucca


 
I don't recall there being a time limit, but in the 3.7/4.1 code branches all of the SNMP functions got moved into access policies so I suppose its possible.
 
Thanks anthonyandanberg , I was misled , it was dram mem at 99% causing my issue and a reboot sorted it.
Thanks anyway for your interest

Mucca
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top