Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
850 Error 07.004.46:9529
- Thread starter etco1
- Start date
Bacardi412
Technical User
Process Motor Fault --- Drum Maintenance Cam Fault State -- Verify that clutches and sensors are working.
More than likely it is the Process motor that has failed. Check the motor/clutch under the paper pickup clutch on the left side of the printer to verify it is working. Check to make sure that the Drum Latch; (the big metal "L"
is still attached to the spring tensioner.
Let me know what finally fixes it and sorry I cant give more on this.
More than likely it is the Process motor that has failed. Check the motor/clutch under the paper pickup clutch on the left side of the printer to verify it is working. Check to make sure that the Drum Latch; (the big metal "L"
is still attached to the spring tensioner.Let me know what finally fixes it and sorry I cant give more on this.
- Status
Similar threads
- Locked
- Question
