Can anyone post their QSIG configs that have successfully displayed calling name ID on both ends of a 81C & Definity PRI route? The 81C will let me add RCAP NDI but refuses to let me add any DV*** or PRI RCAP to D-channel, response to DV*I is SCH0099 and PRI is SCH0034.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
81C to Definity G3R QSIG
- Thread starter LanceMI
- Start date
Avaya911PLM
Vendor
Try your RCAP as:
COLP NDI CCNI CCBI DV3I
Also make sure you are ISGF in the DCH and the RDB.
--
Fletch
COLP NDI CCNI CCBI DV3I
Also make sure you are ISGF in the DCH and the RDB.
--
Fletch
- Thread starter
- #4
Avaya911PLM
Vendor
Print your package list in LD 22, and post the DCH config. Something is not correct. It let you define the ISGF inthe interface type, but it is not letting you put in Diversion or path replacement. Interesting.
--
Fletch
--
Fletch
- Status
Similar threads
- Locked
- Question
