Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

8.1.63 Buggy with VMPro over an SCN

Status
Not open for further replies.

bmast

IS-IT--Management
Jun 21, 2010
35
US
Recently upgraded an IP Office 7.0 system to 8.1.63 configured with an SCN. The menu key presses in VMPro quit working after an unspecified period of time from the remote site. This can be cured with a reboot, but re-occurs after a period of time. Also the remote site incorrectly shows a "all voicemail channels in use" alarm even when the HQ site does not.
Two Systems both on 8.1.63 with a centralized Linux voicemail server 8.1.20-3; 8 scn channles between systems (no all all trunk busy alarms).
Problem began with upgrade, disappears on reboot and re-appears 1-2 days later.
Only reboot of the HQ (w/ Central VM) resolves the issue. Reboot of remote IPO or just VM system does not cure the symptom.
Has anyone else seen this? I called into support and was told that this is a problme with 8.1.63, does anyone know if this is an issue on 8.1.57?
 
I had this problem and downgraded to last known stable release 8.1.43. This fixed the issue
 
We downgraded to 8.1.56 with the patch and have not had an issue since.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top