Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

8.0.16 to 8.0.51 Upgrade Problem

Status
Not open for further replies.

crhoads71

IS-IT--Management
Jan 18, 2012
15
US
I have 3 of the DIG ADPX30 Nortel interface units attached to my IP Office. When I attempt to upgrade I can't get all three to upgrade. Sometimes two of them go to 51 and sometimes only one, but I can't get all three to upgrade. We have upgraded multiple times before without this issue. However the Nortel interface units have been a little flaky at times. Any ideas?

One more thing can I go to 8.1 without a license upgrade of some sort?

 
you need an upgrade license to go to 8.1
you can upgrade the expansion units separate, or just take the SD card, upgrade that one (via format and recreate)and the reboot the entire system.
I have also found that the Nortel modules are crappy and we had to even replace one that died during an upgrade. Seeing that we only installed a handful of these units (we avoid them as Nortel phones just don't make the cut on an IPO) that is a high percentage.

Joe W.

FHandw, ACSS (SME), ACIS (SME)



There are 10 types of people in the world: Those who understand binary, and those who don't
 
Hi,
You don't need a license for upgrade from 8.0(16) to 8.0(51) but from 8.0 to 8.1 you need it.
That's what i know !

Regards,
 
where is this old thread coming from??

Joe W.

FHandw, ACSS (SME), ACIS (SME)



Give a tech a solution and he will be back tomorrow to ask you the next question, teach a tech how to read the manual and he will be able to solve the problems for a life time.
 
I was just helping you !
I thaught the problem still present.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top