Dear all
On the 7606 Cisco router that we have :
Gaza-7606-1#sho redundancy
Slot 1 : Active
Slot 2 : Standby
ACTIVE VERSION :
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 05-Jun-04 05:55 by pwade
STANDBY INFO :
Standby up
Standby version:
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(13)E14, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 30-Mar-04 14:09 by pwade
Gaza-7606-1#sho version
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 05-Jun-04 05:55 by pwade
Image text-base: 0x40008F90, data-base: 0x41878000
ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
xyz-7606-1 uptime is 8 weeks, 1 day, 4 hours, 16 minutes
Time since xyz-7606-1 switched to active is 8 weeks, 1 day, 4 hours, 17 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:c6sup22-psv-mz.121-22.E2.bin"
cisco CISCO7606 (R7000) processor (revision 1.0) with 458752K/65536K bytes of memory.
Processor board ID TBM08150819
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 FlexWAN controller (2 Serial).
2 Virtual Ethernet/IEEE 802.3 interface(s)
4 Gigabit Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
381K bytes of non-volatile configuration memory.
32768K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.
Configuration register is 0x2102
Gaza-7606-1#sho memory
Head Total(b) Used(b) Free(b)
Processor 42093A80 435602816 22744376 412858440
I/O 8000000 67108864 8771248 58337616
1-How can I switchover from the active processor to the standby processor?
2-How can I verify the amount of flash memory on the active processor ?
3-How can I verify the amount of flash memory on the standby processor ?
4-How can I verify the amount of RAM on the active processor ?
5-How can I verify the amount of RAM on the standby processor ?
Many thanks in advance
On the 7606 Cisco router that we have :
Gaza-7606-1#sho redundancy
Slot 1 : Active
Slot 2 : Standby
ACTIVE VERSION :
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 05-Jun-04 05:55 by pwade
STANDBY INFO :
Standby up
Standby version:
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(13)E14, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 30-Mar-04 14:09 by pwade
Gaza-7606-1#sho version
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 05-Jun-04 05:55 by pwade
Image text-base: 0x40008F90, data-base: 0x41878000
ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
xyz-7606-1 uptime is 8 weeks, 1 day, 4 hours, 16 minutes
Time since xyz-7606-1 switched to active is 8 weeks, 1 day, 4 hours, 17 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:c6sup22-psv-mz.121-22.E2.bin"
cisco CISCO7606 (R7000) processor (revision 1.0) with 458752K/65536K bytes of memory.
Processor board ID TBM08150819
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 FlexWAN controller (2 Serial).
2 Virtual Ethernet/IEEE 802.3 interface(s)
4 Gigabit Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
381K bytes of non-volatile configuration memory.
32768K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.
Configuration register is 0x2102
Gaza-7606-1#sho memory
Head Total(b) Used(b) Free(b)
Processor 42093A80 435602816 22744376 412858440
I/O 8000000 67108864 8771248 58337616
1-How can I switchover from the active processor to the standby processor?
2-How can I verify the amount of flash memory on the active processor ?
3-How can I verify the amount of flash memory on the standby processor ?
4-How can I verify the amount of RAM on the active processor ?
5-How can I verify the amount of RAM on the standby processor ?
Many thanks in advance