finnaddict
Vendor
Has any one had any experience with the use of theese phones and can you do anything to enhance the range on them ?? what kind of coverage did you get . this set up would be covering a good sized truck service area 300 x 300.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
7406 e cordless phone range 2
- Thread starter finnaddict
- Start date
- Status
-
1
- #2
Best thing you can do is mount the base station as high as you can and minimize obstructions to signals as best you can.
300'X 300' will possibly be pushing it when the bays are full unless the base is mounted in the center of the ceiling. Even then, no guarantees.
300'X 300' will possibly be pushing it when the bays are full unless the base is mounted in the center of the ceiling. Even then, no guarantees.
-
1
- #3
I have 3 base units in a very large 3 story building wih concrete and steel wall partitioned rooms. We mount the base units on the second floor equipment room that is approx in the middle. It has excellent coverage, even in the smoking area out front bottom floor. Wall penetration is good.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
