Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

7406 Base station

Status
Not open for further replies.

Audioman1

Technical User
Aug 21, 2005
52
US
Where can I get an installation manual for a T7406 base station?
 
Thanks

I have the user card. I need to know what the flashing LED is indicating as well as setting the code for the base.
The user card shows how to send from the phone, but I cannot get time and date. Shows send OK when trying to program phone. Seems to be a security code issue.
 
Follow the telphone setup portion of the user card. the flashing LED means nothing.

Jeff
 
All I get is the battery indicator and antenna signal on the LCD. The phone is seeing the base station but it seems as if the base station is not seeing the line.

Ideas??
 
Do you have your norstar station port in line 1 on the base and your handset id set to 1?
 
Yes the base has a Line 1 in and the handset is also on ID 1. Switches are Up Dn Up, if that means anything.
 
Try calling in to the set and see if that doesn't get it to displat time and date.

I'd rather have a bottle in front of me than to have a frontal lobotomy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top