Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

7324 and T7316E Keypad Problem

Status
Not open for further replies.

bekcom

IS-IT--Management
Sep 14, 2005
97
CA

I am having an issue with not hearing the clicking tone when the keypad is pressed. When my customer dials out sometimes you do not hear the click or tone associated with pressing a digit on the keypad. The call does go out so it is generating the DTMF tones on the trunk, but the user is not sure all the digits were dialed.

If I dial out slowly it is fine.

Thanks

Norm






Old ROLMan working on Norstars
 
speakerphone mode or handset mode? in speakerphone mode it may just be the tx/rx discriminator having too much noise coming in on the mike and it blocks the incomming/received analog.

handset: Volume? can't think of anything else off hand.


----------------------------
'Rule 29', "The enemy of my enemy is my enemy's enemy. No more. No less."
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com

 
These are only used with headsets no handsets, these are 911 answer positions. The other two sets on the system work fine. Will look at the headset amp tonight as it does phone and radio .


Old ROLMan working on Norstars
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top