7.0.12 Admin 1

[IPOTraining]

Ummm. What's the point?

Dennis

 

[IPGuru]

Guess that's why they don't want to tel what has been fixed anymore .

I do not Have A.D.D. im just easily, Hey look a Squirrel!

 

[hairlessupportmonkey]

bit like BT faults.

Sorry no fault found on the line.
5 mins later Line working OK.
Magic!

ACSS - SME
General Geek

 

[mforrence]

But it didn't fix the undocumented fault that I've been waiting for. Since R7 release, you can't configure a T1 without a "The number of configured channels on universal PRI exceeds the number of licensed channels" error. We configure all but one channel as "out of service" and get the same error. Remember, you're supposed to get 8 channels "free" with purchase of the module. ONLY changing trunks to PRI makes the error go away. I can replicate this error on any R7 system in fifteen seconds. The Avaya tier 3 guy said that he couldn't replicate it, but he didn't have access to R7 manager - they weren't given access to "the new stuff". Amazing to me...
Mike

 

[tlpeter]

I am just upgradeing our inhouse system.
It is copying 2418 files!!!!


BAZINGA!

I'm not insane, my mother had me tested!

 

[hairlessupportmonkey]

well, it hasnt fixed anything in CCR

a months time card reports now just time out completely.

ACSS - SME
General Geek

 

[amriddle01]

Mike, I assume you also reduce the number of channels on the first tab of the lines as well as putting the channels in/out of service

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[mforrence]

@amriddle01 - I'm not sure what field you are describing. In earlier versions, it was purely the number of channels in service. I did config on R6 (Manager r8) and didn't have the same error. In R7, if either trunk is set for T1 (vs PRI), I get the "exceeded licensed channels" error - even if I have all channels out of service.
Mike

 

[jamie77]

1 Hour 25 mins and 2.4k files to upload to get this release on an IP500v2!!!

Jamie Green

Football is not a matter of life and death-It is far more important!!!!

 

[amriddle01]

That's a standard time for me since the v2 came out

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[jamie77]

It's getting longer and more files!!!!

I can't wait to get R10 and watch an IPO upgrade for 4 hours!!!

Jamie Green

Football is not a matter of life and death-It is far more important!!!!

 

[amriddle01]

As a test I uploaded a ton of bin files to both a v1 with CF card and a v2 with SD card and the v1 took around 5 mins the v2 40 .... basically the read/write to the cards is way too slow

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[jamie77]

I need to find an old SD card use my card reader to copy the memory card folder to it using windows and then the same with manager and see if there is a difference.

It is seriously far too slow.

Upgrades used to be easy and quick. Not any more!

Jamie Green

Football is not a matter of life and death-It is far more important!!!!

 

[tlpeter]

I have a PCS 1 card.
I will try to see how long that takes when i have the time.


BAZINGA!

I'm not insane, my mother had me tested!

 

[amriddle01]

I don't see it ever changing, all the files used to sit on the file server/Manager PC, now you have to upload all those files to the card and as there are so many individual files it just takes ages. On your PC Try moving the docs CD from one folder to another (while it's still zipped/compressed), takes a couple of mins, extract it and try again...takes hours

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[nlasch]

Avaya should fix the file updating on the SD Cards.

Is it that hard to upload a compressed file and have the system decompress it? Or if they are worried about CPU load, why not concatenate all the files as one big file and split it again? Like copy /b used to do in MS-DOS.

 

[tlpeter]

Just edit the IPOAlaw or IPOUlaw text file.
Remove all lvmail languages that you will not use.
It speeds up a lot.

BAZINGA!

I'm not insane, my mother had me tested!

 

[biv343]

I don't know if its just me but I'm firing up a new 500V2 PCS08 and the file upload is going a lot faster than it did in the past.

 

[biv343]

Scratch that. Back to snail speed. I thought I was on to something for a brief moment.

 

[amriddle01]

It usually slows once the VM files start to fire across, you can edit the file list to reduce the languages down to what you actually use though

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[biv343]

I don't ever recall seeing transfer rates of 800K a second on the previous systems I installed. It seemed it always maxed out around 250K. I'm back to the land of "Unknown" and "Infinity" transfer rates now. Oh well. Its something to stare at on a Friday while web surfing.