Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

6X16 CLID

Status
Not open for further replies.

rcr3530

Technical User
Jun 14, 2006
62
US
Hi All I have a challange to install a CLID for a 6 x 16, I have an idea but it will be better if I follow some real instructions.
is a 6 x 16 DR5


Thanks
 
You need a C6 module, and service from the carrier. Connect line one to the W/Bl pair on the amphenol off the C6. Then from the W/Bl pair (yes, straight through)continue to the phone system. DO this for each line, W/O pair is line two, W/Gr is line three..
Customer will have to use Feature 811 (caller ID inspect to view prior to picking up the line. Only prime set will display info with nothing further to do.
 
So it means that it wont display automatically in all the phones?
 
That's correct. You will need to move up to a CICS or a MICS running 6.1 or higher software. The CICS would probably be the better jump up from a 6x16.
 
Nice info I'll give it a try...Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top