6X16 CLID

[rcr3530]

Hi All I have a challange to install a CLID for a 6 x 16, I have an idea but it will be better if I follow some real instructions.
is a 6 x 16 DR5


Thanks

 

[jahms]

You need a C6 module, and service from the carrier. Connect line one to the W/Bl pair on the amphenol off the C6. Then from the W/Bl pair (yes, straight through)continue to the phone system. DO this for each line, W/O pair is line two, W/Gr is line three..
Customer will have to use Feature 811 (caller ID inspect to view prior to picking up the line. Only prime set will display info with nothing further to do.

 

[rcr3530]

So it means that it wont display automatically in all the phones?

 

[jahms]

That's correct. You will need to move up to a CICS or a MICS running 6.1 or higher software. The CICS would probably be the better jump up from a 6x16.

 

[rcr3530]

Nice info I'll give it a try...Thanks