Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

6920,6930,6940 Phones 1

Status
Not open for further replies.

Rich14

Technical User
Nov 17, 2008
85
0
0
GB
Hi,

MCD 3300 R8.
What am I missing, I cannot get the corporate directory to display on 69XX phones.
I have configured the new LDAP form and allocated it in the system options.
I do not have a separate LDAP system, I need to use the LDAP-Minet on the 3300.

Is there a COS option ?
 
Can you check in your System IP Settings if you have a domain name configured?
The upgrades that I have done that have a domain name configured seem to work ok, but have had a couple with no domain name where the corporate directory have failed. Without the domain set, the LDAP base domain sets itself to dc=my-domain,dc=com which could be the reason for the failure.
 
Thanks Jemson - Not OP, but your post was exactly what I needed.

As soon as I added the domain, the Corporate directory started working.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top