Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

6900 series customization

Status
Not open for further replies.

AlphaMann

Technical User
Nov 16, 2012
289
CA
I find it so infuriating that Mitel is still not supporting custom ringtones yet.
Has anyone been able to figure out how to either:
A) Edit/View the .ST files
B) Connect to the phones to view the files in the file structure.

I see the upload option and assume that the audio files may exist in one of the presented directories.
Need just a Beep ringing tone.

Although- Finally 2 ringtones for internal/external

 
If you have an Asterisk or simular PBX then you can send a different Bell Core

send a SIPAddHeader before the Dial and one of the Alert-Info's.

Alert-Info: info=<silent> (Silent only MWI flashes)
Alert-Info: info=<Bellcore-dr1> (Bellcore dr1, default ringtone)
Alert-Info: info=<Bellcore-dr2> (Bellcore dr2, ringtone 2)
Alert-Info: info=<Bellcore-dr3> (Bellcore dr3, ringtone 3)
Alert-Info: info=<Bellcore-dr4> (Bellcore dr4, ringtone 4)
Alert-Info: info=<Bellcore-dr5> (Bellcore dr5, ringtone 5)

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top