Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

5621sw

Status
Not open for further replies.

phantomiii

Programmer
Mar 8, 2006
76
US
Looks exactly like the 5620 with the backlight added. Has anyone tried running these on a 3.1 406V2? The 5621 came out with release 3.2, but I'm sure if I add the 3.2 46xxx.scr and the appropriate bin files for that IP phone. It should work on the IP office on a 3.1 release.

The customer has a complicated CCC install and has zero problems right now. I'd hate to upgrade the switch and VMPro and then introduce any new bugs to them. So again, Anyone try a 5621 on a 3.1 release?
 
Yup. They sent us some 5621 replacements for our 5620's. I've been testing one in my office for about a week now.

We're running 3.1.65 in a SCN with 7 sites. I didn't add or change any .scr files. I just let it pickup the same files that our 5620's are using. No issue thus far...
 
sweet. I used a testbed 3.1.65 system too, and the 5621 phones came up fine and seemed to work just fine too!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top