Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

5550 IP Console

Status
Not open for further replies.

1973stu

Programmer
Jul 18, 2006
24
GG
Does anyone know if the console boots up in the same way as other IP Phones?
 
Yes and No,

The process of booting and obtaining DHCP addresses and upgrading is the same.

The setup requires that the console be assigned a Static Address from DHCP. It cannot be statically assigned manually.

 
Does this mean that that when the console boots on a default VLAN it still 'sees' the DHCP options sent out and then switches to the 3300 VLAN to recieve its static address?
 
How is it possible that the console PC and the key pad have the same IP Address from the Data VLAN?
 
Sorry, I must have misunderstood your question.

It is not possible for the Key Pad and the PC to have the same address.

Typical Scenario:

Key Pad requests DHCP
Key Pad Gets IP from Data Lan (e.g.) 10.10.10.2
Key Pad gets DHCP Options (VLAN and Priority)
Key Pad Releases IP
Key Pad Requests DHCP on Voice VLAN
Key Pad gets IP from 3300 (e.g.) 192.168.1.11
Key Pad Registers and upgrades if required and is functional


PC requests DHCP
PC Gets IP from Data Lan (e.g.) 10.10.10.3
Done



There is an island of opportunity in the middle of every difficulty.

Miss that though, and you're pretty much doomed!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top