loopretnav
Technical User
Help needed to setup call forwarding of a 5330 IP Phone on MCD 4.2
or 8.0 neither works.
or 8.0 neither works.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
5330 IP Phone Forwarding
- Thread starter loopretnav
- Start date
- Status
How are you bsetting it up now?
If you are using superkey there are two steps.
First you set it up with the type of divert and the destination.
Then you have to go back in and actually enable it.
You could set it up so that a key enables it and disbales it to save using the superkey
Or use the desktop tool on a PC to do everything.
if its external make sure you add a 9 to the number.
If you are using superkey there are two steps.
First you set it up with the type of divert and the destination.
Then you have to go back in and actually enable it.
You could set it up so that a key enables it and disbales it to save using the superkey
Or use the desktop tool on a PC to do everything.
if its external make sure you add a 9 to the number.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question