5304 intervaln routing

[Cavalieri]

I got three switches Procurve 5304 and one 2512

I set four VLAN’s on all switches with those IP’s

Switch 1 (Main)
VLAN10 192.168.10.1
VLAN20 192.168.20.1
VLAN30 192.168.10.1
VLAN40 192.168.10.1

Switch 2
VLAN10 192.168.10.2
VLAN20 192.168.20.2
VLAN30 192.168.10.2
VLAN40 192.168.10.2

Switch 3
VLAN10 192.168.10.3
VLAN20 192.168.20.3
VLAN30 192.168.10.3
VLAN40 192.168.10.3

Switch 4
VLAN10 192.168.10.25
VLAN20 192.168.20.25
VLAN30 192.168.10.25
VLAN40 192.168.10.25

All my servers are connected to switch 1 (Main). On two of my server I Installed Kerio WinRoute Firewall, the first to access the Internet and the other to access a Remote LAN through a Modem HDSL.
? Internet Server has the network interface with IP 192.168.10.4
Server to access the remote LAN has the network interface with IP 192.168.10.11.

On my switch 1 (Main) I created the following static route:
0.0.0.0/24 192.168.10.4
10.0.0.0 / 8 192.168.10.11

(At the moment all my host's are assigned to VLAN10 and everything working nicely).

I enabled the IP routing on all the switches, I assigned the gateway to the hosts for their own VLAN, but I’m not able to ping host's in different VLAN's. Finally I enabled the GVRP, now I can ping hosts' from vlan20 to vlan10 but not vice versa, and especially I’m not able to ping servers with Kerio installed (192.168.10.4 and 192.168.10.11) by vlan20, 30.40.

What's wrong? Do you have any other suggestions to complete this VLAN routing?

Any kind of suggestion will be appreciated.

Cavalieri

 

[burtsbees]

You are listing vlan 10, 30 and 40 ALL with the SAME IP address as eachother in all switches...

Burt

 

[Cavalieri]

Sorry I made a mistake writing IP's,
Vlan30 and 40 on all switches have Ip's 192.168.30.x and 192.168.40.x

Thanks Cavalieri