501 - Radius vpn - cant access lan grom Client

[ebusdk]

Hi

I have set up this new Pix 501- I get prompted for the username and password, and i get validated through Radius, but i cant access the LAN.

This is my config

PIX Version 6.3(4)
interface ethernet0 10baset
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxx.xxx.xxx.xxx encrypted
passwd xxx.xxx.xxx.xxx encrypted
hostname pix501
domain-name asha.local
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list inet-incoming permit tcp any host xxx.xxx.xxx.xxx eq www
access-list inet-incoming permit tcp any host xxx.xxx.xxx.xxx eq ftp-data
access-list inet-incoming permit tcp any host xxx.xxx.xxx.xxx eq ftp
access-list inet-incoming permit tcp any host xxx.xxx.xxx.xxx eq https
access-list inet-incoming permit tcp any host xxx.xxx.xxx.xxx eq smtp
access-list inet-incoming permit icmp any any
access-list inet-incoming permit tcp any host xxx.xxx.xxx.xxx eq 3389
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.xxx.xxx 255.255.255.248
ip address inside 192.68.135.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool ippool 192.68.135.100-192.68.135.150
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 192.68.135.0 255.255.255.0 0 0
static (inside,outside) tcp xxx.xxx.xxx.xxx

http://www 192.68.135.130

http://www netmask

255.255.255.255 0 0
static (inside,outside) tcp xxx.xxx.xxx.xxx ftp-data 192.68.135.130 ftp-data netmask 255.255.255.255 0 0
static (inside,outside) tcp xxx.xxx.xxx.xxx ftp 192.68.135.130 ftp netmask 255.255.255.255 0 0
static (inside,outside) tcp xxx.xxx.xxx.xxx https 192.68.135.130 https netmask 255.255.255.255 0 0
static (inside,outside) tcp xxx.xxx.xxx.xxx smtp 192.68.135.130 smtp netmask 255.255.255.255 0 0
static (inside,outside) tcp xxx.xx.xx.xx 3389 192.68.135.12 3389 netmask 255.255.255.255 0 0
access-group inet-incoming in interface outside
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 217.157.42.65 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
aaa-server mobileauth protocol radius
aaa-server mobileauth max-failed-attempts 3
aaa-server mobileauth deadtime 10
aaa-server mobileauth (inside) host 192.68.135.12 xxxxxxxx timeout 5
http server enable
http 192.68.135.22 255.255.255.255 inside
snmp-server location Denmark
snmp-server contact IT-grp xxxx@xx.xx
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt ipsec pl-compatible
crypto ipsec transform-set strong esp-3des esp-sha-hmac
crypto dynamic-map dynmap 50 set transform-set strong
crypto map asha 50 ipsec-isakmp dynamic dynmap
crypto map asha client configuration address initiate
crypto map asha client configuration address respond
crypto map asha client authentication mobileauth
crypto map asha interface outside
isakmp enable outside
isakmp policy 9 authentication pre-share
isakmp policy 9 encryption 3des
isakmp policy 9 hash sha
isakmp policy 9 group 1
isakmp policy 9 lifetime 86400
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup asha-vpn address-pool ippool
vpngroup asha-vpn dns-server 192.68.135.13
vpngroup asha-vpn wins-server 192.68.135.12
vpngroup asha-vpn default-domain asha.local
vpngroup asha-vpn idle-time 1800
vpngroup asha-vpn password ********
vpngroup <usernamehere> idle-time 1800
telnet 192.68.135.0 255.255.255.0 inside
telnet timeout 5
ssh xx.xx.xx.xx 255.255.255.255 outside
ssh 192.68.0.0 255.255.0.0 inside
ssh timeout 30
management-access outside
console timeout 0
terminal width 80

 

[themut]

Add the following command and try again:

isakmp nat-traversal

It will use the default keepalive value.

 

[ebusdk]

you are to cool thanks a million, dont know why I dident get that line with me, when made that config. I need to buy that solarwinds pix-editor. just wasted 4 hours on that mistake ...