500 Station Ports vs Linside T1

[bugdog]

I have a Opt11C with CallPilot (using auto Attn) in a remote area where there is no access to a CO. I only have access to an Opt61C. My problem: If I use 500 station ports from the 61C as COT's to the 11C I have a problem with disc supv and the auto attn ports are held up for some time or won't disc at all. Would utilizing a Line Side T1 instead of 500 stations (500 stations would be riding the Lineside T1) from the 61C as trunks to the 11C correct the disc supv problem?

Any sugestions are greatly appreciated but remember I have no other options other than mentioned above.
thanks

 

[hawks]

You can use an E&M or T1 trunk cards. As far as the analog goes probably your Line Side is the way to go. I did it with either the NT8D09 or the CLASS Modem card (don't remember which) about 3 years ago by reversing T&R. I think it was with the ClASS card though and if you don't have one to try that would be an expensive test. Maybe someone has one that they can try and let us know if it works.

 

[johnpoole]

pri would be the cleanest, names and mwi lamps, next would be the line side, analog ports will work but problems with timers are common

john poole
bellsouth business
columbia,sc

 

[acewarlock]

I did it many years ago using plain cot trunk cards Cls LDR with GRD Start.