500 Analog only works every other time

[plough]

5.o / Cs1000E CPPM
Analog line (500 type)

Go off hook you get Dial Tone every other time - but only Talk Battery the other half.
Verified @ Block w/t butt set

Have swapped CARDS and SLOTS
Only Analog set in system


DES CAFE
TN 004 0 07 00 VIRTUAL
TYPE 500
CDEN 4D
CUST 0
ERL 00000
WRLS NO
DN 74483 0
CPND
NAME CCES CAFETERIA
XPLN 23
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 8
LDN NO
NCOS 5
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR MCDD T87D PKCH
PLEV 02
AACS NO
MLWU_LANG 0
DATE 3 JUL 2013

 

[kstaff22]

that sounds like an issue with the DTR---
change the CLS from DTN to DIP and go off hook---if it does the same it is NOT the DTR

DTR should be programmed in slots 14 and 15 (only 15 if you have a 128 port dsp in 11)