I currently have one site that uses 4 digit dialing internally. I want to set up 5 digit dialing to other sites not on the same network. The users would dial 5 digits and essentially make an outgoing call to the other sites. The DID ranges are basically the same number range even though the area codes and exchanges are different.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
5 digit dialing to other sites' DID's
- Thread starter mrecco
- Start date
bigindian65
Technical User
so, you want to trick it? Going out PSTN? Then you would use SPNs and DMI tables to conv 5 digits to npa-nxx-xxxx. I would create at RLI 100 with DMI 100 as the references for the SPNs you need in place and config out what you need.
Mato' Was'aka
Mato' Was'aka
- Status
Similar threads
- Locked
- Question
- Locked
- Question