4cond or 6 cond line cord to a klm?

[PHONEGUY06]

Does the line cord that connects the klm to the M7324 have to be a 6 cond?? Should it work with a 4 cond?

 

[phoneguy427]

From the CAP to the M7324 you only need 2 conductor. From the wall to the CAP you need 4 or 6 conductors depending on the number of CAP's you have.

 

[PHONEGUY06]

only using 1 cap/klm {48 button}. You're saying no 6 cond line coed is needed anywhere? I'm rying to figure out how to wire the pwr supply also. Theres 4 terminals, spare,minus,plus,spare

 

[techtel]

YOU NEED A 6 COND. FROM YOUR WALL JACK TO KLM AND A 2 OR 4
FROM KLM TO 7324. JUST USE PLUS AND MINUS ON THE PWR.

 

[PHONEGUY06]

ok, plus and minus, but where do they go? plus to what/where minus to what/where?

 

[senk1s]

Didnt you get a wiring guide along with the SAPS?

if there is a 2 pair - the phone works on one pair
that leaves only one more pair for the power supply

 

[DTone]

On the older nortel systems the power for the cap went on the green pair of the jack, so you do need a 6 cond from the wall to the cap and then you can use a 2 cond to the phone.

 

[Bob3470]

The set goes on the b/w pair o/w pair is power for the first cap and g/w pair is power for the second cap . The power is tied down negative on ring side (Orange or Green) and positve is on the tip side (white orange or white green)