Ok... I have followed the configuration guide to the T on trying to set up the redundancy for the SupIV's.
Rack002_4507R#sh redundancy states
my state = 13 -ACTIVE
peer state = 1 -DISABLED
Mode = Simplex
Unit = Primary
Unit ID = 1
Redundancy Mode (Operational) = Non Redundant
Redundancy Mode (Configured) = Stateful Switchover
Split Mode = Disabled
Manual Swact = Disabled Reason: Simplex mode
Communications = Down Reason: Simplex mode
client count = 22
client_notification_TMR = 240000 milliseconds
keep_alive TMR = 9000 milliseconds
keep_alive count = 0
keep_alive threshold = 18
RF debug mask = 0x0
Rack002_4507R#sh run
-deleted all other info-
redundancy
main-cpu
auto-sync startup-config
auto-sync config-register
auto-sync standard
mode sso
Rack002_4507R#sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I5K91S-M), Version 12.2(20)EWA4, RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 13-Oct-06 11:35 by kellythw
Image text-base: 0x00000000, data-base: 0x012D5610
ROM: 12.2(20r)EW1
Dagobah Revision 95, Swamp Revision 29
Rack002_4507R uptime is 2 weeks, 1 day, 5 hours, 49 minutes
System returned to ROM by reload
System restarted at 15:28:35 CST Thu Aug 7 2008
System image file is "bootflash:cat4000-i5k91s-mz.122-20.EWA4.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C4507R (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID
MPC8245 CPU at 333Mhz, Supervisor IV
Last reset from Reload
31 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
124 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
Configuration register is 0x2102
Any help would be appreciated on setting up this redundancy for the Sup's. I am banging my head against the wall trying to get this set up.
------------------------------------
Dallas, Texas
Telecommunications Tech
CCVP, CCNA, Net+
CCNP in the works
Rack002_4507R#sh redundancy states
my state = 13 -ACTIVE
peer state = 1 -DISABLED
Mode = Simplex
Unit = Primary
Unit ID = 1
Redundancy Mode (Operational) = Non Redundant
Redundancy Mode (Configured) = Stateful Switchover
Split Mode = Disabled
Manual Swact = Disabled Reason: Simplex mode
Communications = Down Reason: Simplex mode
client count = 22
client_notification_TMR = 240000 milliseconds
keep_alive TMR = 9000 milliseconds
keep_alive count = 0
keep_alive threshold = 18
RF debug mask = 0x0
Rack002_4507R#sh run
-deleted all other info-
redundancy
main-cpu
auto-sync startup-config
auto-sync config-register
auto-sync standard
mode sso
Rack002_4507R#sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I5K91S-M), Version 12.2(20)EWA4, RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 13-Oct-06 11:35 by kellythw
Image text-base: 0x00000000, data-base: 0x012D5610
ROM: 12.2(20r)EW1
Dagobah Revision 95, Swamp Revision 29
Rack002_4507R uptime is 2 weeks, 1 day, 5 hours, 49 minutes
System returned to ROM by reload
System restarted at 15:28:35 CST Thu Aug 7 2008
System image file is "bootflash:cat4000-i5k91s-mz.122-20.EWA4.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C4507R (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID
MPC8245 CPU at 333Mhz, Supervisor IV
Last reset from Reload
31 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
124 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
Configuration register is 0x2102
Any help would be appreciated on setting up this redundancy for the Sup's. I am banging my head against the wall trying to get this set up.
------------------------------------
Dallas, Texas
Telecommunications Tech
CCVP, CCNA, Net+
CCNP in the works