Random IPX Network errors is sort of vague- I dont think you need to do anything special for IPX if your only using a 4006 at layer 2. I don't know what SW you're running, I've seen 4006's running SW 5-5-4b not get the Novell login screen. A re-boot seemed to fix the problem. You might try upgrading to SW 5-5-7 if your memory is adequate,it might help.
If you are able to set up a login account at the cisco web site you can look at the release notes for the different SW versions & see the fixes & caveats for each.
Use portfast with caution, Portfast on all blades can be dangerous if you have redundant links. Only use portfast on ports to end stations.
Good Luck,
ACAC
Further investigation has found that devices on the new switch (i.e. print servers) are not visible in and can not be managed from NDS. Someone had mentioned something about an IPX trunking command over uplink ports?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.