Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

4.0 on a 406V2 and SIP Trunks

Status
Not open for further replies.

IThack

IS-IT--Management
Nov 4, 2005
49
GB
A few questions about 4.0 and using SIP. I have a 406V2. It has 64MB, so I can upgrade it (not tried yet).

Anyone know what it costs for SIP Trunk licenses? Preferably UK pricing. Anyone know what's the procedure for getting a trial license, and how long they last for?

Tech Bulletin 80 talks about using LAN1 for the local LAN, and LAN2 for external (SIP). As the 406V2 only has one LAN connection, how do you setup SIP trunks and deal with the firewall issues, IP addressing (NAT), etc. Is using a 406V2 for SIP trunks a bad idea?
 
I think it's about £50 for 1 license and just short of £200 for 5 licenses RRP.

Where do you buy your equipment from. MTV sent us a new price list a week ago.

I don't think there are any problems using a 406v2 for SIP. I am going to be tring it in our office in a couple of weeks.

Jamie Green

IPO ACA:Implement


Fooball is not a matter of life and death-It is far more important!!!!
 
I had a play with 4.0. H323 trunks stop working with 4.0. Not sure if this is by deisgn, but there's a note int he help file about dropping all H323 traffic.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top