soonerincali
Technical User
Any idea why the daylight savings didn't occur on this release. Doesn't it follow the time of the pc? PC time is right, ipo is 1 hour ahead. Rebooted ipo, and pc, no change.
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
4.0.10 Time change didn't occur
- Thread starter soonerincali
- Start date
- Status
amriddle01
Programmer
Was Manager/VM running on the PC? It needs to be, as the IPO uses a differenr protocol than normal.
ACS - IP Office Implement
ACS - IP Office Implement
In 4.0.10 you can set a system phone and then use shortcode *9009* and the HOLD button
Then you can set date and time manualy
ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
Then you can set date and time manualy
ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
- Thread starter
- #4
soonerincali
Technical User
Checked the ip address of the pc running manager and verified that ip address in the ipo, took care of it.
Much Thanks
Much Thanks
- Status
Similar threads