3X8 Question

[ptstechnician]

Does this system support Caller ID? NT5B0508 3X8 DR5
Rel 01C (H09) 0400929445

 

[exsmogger]

Yes, but only one set per line can auto display caller ID. All others can use F811 to see Caller ID before answering a call.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[norstarboy125]

I think it needs to be dr5.1 if im not mistaking, its been awhile.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[ironhorse17]

308 Meridian phone system w DR5 NT5B05

Maxium configuration of the Norstar 3x8 system is 3 lines by 8 stations.
The 3x8 DR5 has built in caller ID.
All norstar phones will work with the 3x8 system including the T7406 and M7410.
All analog terminal adapters will work with DR5 software.
All NRU's, Fast Rads, and CTA's will work with 3x8 DR5 software.
SMDR3 or higher will work with 3x8 DR5 software.
All Norstar voicemails are compatible with 3x8 DR5 software.
Voicemail Interfaces are compatible with 3x8 DR5.1 software.
Norstar 3x8 features include speed dial, 3 way conference calling, toll restriction, and voice announce over intercom.

 

[drtelephone]

IT HAS TO BE 5.1 AND CAN RING ON 1 SET BEFORE YOU PICK UP OR ALL SET AFTER YOU PICK UP

 

[exsmogger]

Any 308 DR5 can display caller ID. I just checked my DR5 manual.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952