3rd T-1 on 0x32

[rsjonesy]

What is the configuration and clocking information to install a T-1 in a 12X0 Trunk Module on a 0X32 w/6.1 software when I already have 2 DTI cards in the main cabinet configured for PRI?
Any input will be greatly appreciated!

 

[Rapetou]

you can had your card in the Trunk module in slot 1 only an you will get it in your config...

Good luck

 

[luv2ski]

make sure you have the correct vintage dti card...only the new vintage card will work

ski season has started

 

[senk1s]

also the latest software ... where all the known bugs have been killed

 

[rsjonesy]

I appreciate everyones input, however nobady has answered the question!!!!

 

[bkrike]

The answer is:
It is completely dependent on how the T-1 is configured from the provider.

 

[marktfsmith]

Clock will still be a slave - only 1 master clock source